|
|
|
How to
Measure for Curtains |
|
Before starting, make sure you
record all sizes in either inches or centimetres and
never mix the two. Always use a metal tape measure
to ensure accurate sizes are recorded. |
|
|
|
|
First of
all measure the width. |
|
 |
|
|
|
For an existing curtain track,
measure the width A above. If you need to fit a new
track, we recommend that the track should extend
beyond the recess of the window by 12cm to 15cm and
be fitted above the window recess by 12cm to 15cm |
|
|
|
 |
|
|
|
If your track has an overlap,
measure the track as above, then measure the overlap
and add the two together. (A+B) |
|
|
|
 |
|
|
|
For a pole, measure between the
decorative finial ends. |
|
|
|
Now
Measure the Drop |
 |
Decide first of all if
you want a full length drop
A (we
recommend that curtains clear your floor by
1cm), just past the sill
B, or on
the sill C.
You should also measure
the drop in 3 separate positions as not all
windows are perfectly aligned. Also never
assume that two windows will have the same
measurements, even if they look identical |
|
|
|
|
For eyelet or tab top curtains,
measure from the top of the pole to where you want
them to finish, and we will calculate the overall
drop of the curtains. |
|
|
|
How to
Measure for Blinds |
|
Before starting, decide whether
you want your blinds in the recess or outside the
window, make sure you take into account anything
that may impede the smooth operation of your blind
(e.g. window handles) and always use a metal tape
measure in order to record accurate measurements. |
 |
|
Measure the
recess width in 3 separate places
and record the smallest size. Do
not allow for clearance, we will do
this for you. |
|
|
|
Measure the
recess drop in 3 separate places and
record the smallest size. |
|
|
|
Decide which side
you want all control cords, chains,
etc to hang from. |
|
|
|
For vertical
blinds, decide whether you want your
blind to bunch to the left, right,
split or centre. |
|
|
 |
|
Measure your
overall width of your blind (usually
6cm to 8cm past the recess on either
side). |
|
|
|
Do the same for
the blind drop. |
|
|
|
Decide which side
you want all control cords, chains
etc to hang from. |
|
|
|
For vertical
blinds, decide whether you want your
blind to bunch to the left, right,
split or centre. |
|
|
|
For Velux blinds please contact
us direct |
|
|
|
Please note that Joanne’s Soft
Furnishings will not be held accountable for
inaccurate measurements. |
|
|
